Full tag-based VLAN
Full Range(0 ~ 4095)
255 concurrent VLAN support
Port-based Tag/Untag option
VLAN trunk support
Default Port VID for VLAN-unaware devices
Qos; Priority queueing
4 level Queues (preemption based)
maps 8 priorities(802.1p) into 4 level queues
Free mapping for special purpose or debug
Maximum Access Flexibility
With SHDSL interface, NR104G can support
broadband Internet services with data rates from 200Kbps
to 2.3Mbps on a single pair and up to 9.2Mbps by using four
ports of SHDSL Lines. NR104G's multi-rate and adjustable
SHDSL technique provides the flexibility to set-up and allocate
the range of bandwidth for an existing LAN environment.
Various Routing Functions
To meet the requirements from the service
provider or company network manager, NEXPEED series routers
enable various routing functions such as IP, RIP1 &
RIP2 and etc.
NAT can function as a security device with its address translation
function. NAT also helps ISPs control the assignment of
scarce addresses.
Easy Installation and Management
CLI (Command Line Interface) in the
NR104G router simplifies installation thus reduces operating
cost. NR104G also includes various diagnostic LED’s
for at-a-glance troubleshooting. The LEDs monitor activities
of each port and help pinpoint network problems.
For management and control, NR104G includes embedded Telnet
Server and Client System. S/W can be upgraded in the field
using Trivial File Transfer Protocol.
NR104G is also equipped with a DHCP (Dynamic Host Configuration
Protocol) server and relay agent, which enable dynamic assignment
of IP addresses to multiple PCs.
This feature also simplifies IP address setup, as the router
supplies IP addresses to clients as required, and minimizes
the local set-up time for the network administrator.
POWER REQUIREMENT
AC 85 ~ 265V (Auto Voltage)
MECHANICAL
Dimensions 432mm(W) x 210mm(D) x 43mm(H)
Weight 3.0Kg (6.6 lb)
Mounting Scalable to fit in 19" Rack
ENVIRONMENT
Operating Temp. 0°C to 50°C
Storage Temp. -20°C to 70°C
Humidity 5%~95%, non-condensing
PROTOCOLS
Routing Number/Unnumbered WAN interface,
Dynamic & static IP, RIP1 & RIP2,
Bridging Transparent Bridge
Load Balancing Bridging / Routing
Encapsulation HDLC, PPP, Frame-Relay
TFTP(Trivial File Transfer Protocol)
Proxy-ARP(Address Resolution Protocol)
NAT(Network Address Translation)
DHCP(Dynamic Host Configuration Protocol) Server/Relay
INTERFACES
WAN Four SHDSL (RJ-45 Jacks)
LAN (Ethernet) One 10/100Base-T Ethernet (RJ-45 Jack)
DATA RATE
Rate adaptive or fixed mode
From 200Kbps to 9.2 Mbps
MANAGMENT
CLI(Command Line Interface) : Local
Console Port with DB-9
Remote Management via TELNET
SNMP Agent
System diagnostics and logs
Web based management (HTTP Server)
Configuration backup and restoration
DIAGNOSTIC LEDS
Power On/Off
LAN Status Activity, Collision, Link
WAN Status Sync, Tx-Data, Rx-Data
BACK PANNEL
 |
ⓐ Power Switch
ⓑ To Power : AC Power Inlet
ⓒ To LAN : RJ-45 Jack
ⓓ To Console : DB9 Jack
ⓔ To DSL Line : RJ-45 Jack(use pin no. 4 and 5) |
CERTIFICATIONS
EMC CE EN55022 Class A
EN55024
SAFETY CE EN60950
ACA TS001:1997
ACA/ACIF S043.2:2001
--------------------------------------------------------------------------------
NEXPEED is registered trademark of NexComm Systems Inc. All
other trademarks are property of their respective owners.
Specifications are subject to change without prior notice.
Quality Management
NexComm Systems, Inc has been certified ISO9001 from European
Quality Assurance Ltd. authorized agent of International Standard
Organization(ISO)9001 Quality Management Standard.
View
